Tag: hardware

Featured Updates

BusKill Demos (Windows, MacOS, Linux, TAILS, QubesOS)
previous arrow
next arrow

3D-Printable BusKill Prototype Demo

Today we’re ecstatic to publish our first demo showing a homemade BusKill Cable (in the prototype 3D-printed case) triggering a lockscreen.

[BusKill] 3D Printable Dead Man Switch (Demo)

While we do what we can to allow at-risk folks to purchase BusKill cables anonymously, there is always the risk of interdiction.

We don’t consider hologram stickers or tamper-evident tape/crisps/glitter to be sufficient solutions to supply-chain security. Rather, the solution to these attacks is to build open-source, easily inspectable hardware whose integrity can be validated without damaging the device and without sophisticated technology.

Actually, the best way to confirm the integrity of your hardware is to build it yourself. Fortunately, BusKill doesn’t have any circuit boards, microcontrollers, or silicon; it’s trivial to print your own BusKill cable — which is essentially a USB extension cable with a magnetic breakaway in the middle

Mitigating interdiction via 3D printing is one of many reasons that Melanie Allen has been diligently working on prototyping a 3D-printable BusKill cable this year. In this article, we hope to showcase her progress and provide you with some OpenSCAD and .stl files you can use to build your own version of the prototype, if you want to help us test and improve the design.

ⓘ Note: This post is adapted from its original article on Melanie Allen’s blog.

Demo


In our last update, I showed a video demo where I succesfully triggered a lockscreen using a BusKill prototype without the 3D-printed body for the case and N35 disc magnets. I realized that the N35 disc magnets were not strong enough. In this update, I show a demo with the prototype built inside a 3D-printed case and with (stronger) N42 and N52 cube magnets.

Can’t see video above? Watch it on PeerTube or on YouTube at youtu.be/vFTQatw94VU

Continue reading

BusKill available in-store (Leipzig ProxySto.re)

🇩🇪 Deutsche Version dieses Artikels

We’re happy to announce that, for the first time ever, BusKill cables can be purchased in-person in Leipzig, Germany.

[BusKill] Our Dead Man Switch Magnetic USB Breakaway cables are Now Available in-person in Leipzig, Germany at ProxyStore

The BusKill project has partnered with ProxyStore to make BusKill laptop kill cords finally available from a brick-and-mortar location. You can now go to the following location and purchase a BusKill cable with cash or cryptocurrency.

Wolfgang-Heinze-Str. 14
04277 Leipzig
Germany

Continue reading

3D Printable BusKill Proof-of-Concept

We’re happy to announce that we were successfully able to initiate a BusKill lockscreen trigger using a 3D-printed BusKill prototype!

3D Printable BusKill Proof of Concept (2023.08)

While we do what we can to allow at-risk folks to purchase BusKill cables anonymously, there is always the risk of interdiction.

We don’t consider hologram stickers or tamper-evident tape/crisps/glitter to be sufficient solutions to supply-chain security. Rather, the solution to these attacks is to build open-source, disassembleable, and easily inspectable hardware whose integrity can be validated without damaging the device and without sophisticated technology.

Actually, the best way to confirm the integrity of your hardware is to build it yourself. Fortunately, printing your own circuit boards, microcontroller, or silicon has a steeper learning curve than a BusKill cable — which is essentially just a USB extension cable with a magnetic breakaway in the middle.

Mitigating interdiction via 3D printing is one of many reasons that Melanie Allen has been diligently working on prototyping a 3D-printable BusKill cable this year. In this article, we hope to showcase her progress and provide you some OpenSCAD and .stl files so you can experiment with building your own and help test and improve our designs.

ⓘ Note: This post is adapted from its original article on Melanie Allen’s blog.

Demo

Last month, I successfully triggered a lockscreen event using our 3D-printed BusKill prototype.


Continue reading

3D Printable BusKill Prototypes

We’re happy to announce that we’ve had good progress on the design of the 3D printable BusKill USB-A magnetic breakaway couplers this year!

3D Printable BusKill (2023.04)

While we do what we can to allow at-risk folks to purchase BusKill cables anonymously, there is always the risk of interdiction.

We don’t consider hologram stickers or tamper-evident tape/crisps/glitter to be sufficient solutions to supply-chain security. Rather, the solution to these attacks is to build open-source, disassembleable, and easily inspectable hardware whose integrity can be validated without damaging the device and without sophisticated technology.

Actually, the best way to confirm the integrity of your hardware is to build it yourself. Fortunately, printing your own circuit boards, microcontroller, or silicon has a steeper learning curve than a BusKill cable — which is essentially just a USB extension cable with a magnetic breakaway in the middle.

Mitigating interdiction via 3D printing is one of many reasons that Melanie Allen has been diligently working on prototyping a 3D-printable BusKill cable this year. In this article, we hope to showcase her progress and provide you some OpenSCAD and .stl files so you can experiment with building your own and help test and improve our designs.

ⓘ Note: This post is adapted from its original article on Melanie Allen’s blog.

Developing the Prototype

Screenshot of a GitHub Issue
The original issue posted in GitHub

Ideation

A few years ago, Michael asked me if I was interested in developing a 3D-printed case for the magnetic breakaway. He enumerated the following design requirements:

  • The case should be as small as possible, because it shouldn’t block neighboring ports, nor sit heavy in the port causing it to bump into objects on the desk.
  • The case should be able to be dissembled, so that people can make sure it isn’t tampered with. It shouldn’t be glued together.
  • In order to avoid using glue, we had a factory specially manufacture some hexagonal shaped magnets that we believed would be able to sit inside the printed part without glue.
  • Much like USB breakaways that are designed to prevent wear and tear on ports, the case would house a pogo pins and magnets, and a USB.
Photo of the design on a napkin
Napkin drawing, when you know its serious

However, over the past years’ iterations, we adjusted the requirements:

Continue reading

Scroll to top